| |
J's Racing Accord CL7 - Suspension
- CL7 Special Dumper Full Length Adjustment Kit
Parts# DSPL-E2
Price $4,957.00
Jointly developed with CRUX Engineering, a premier performance / racing suspension manufacturer. The products are designed from enormous data collected from countless field tests on the race track. The stroke, dumping force, gas pressure are all optimized to achieve the best lap times. Feedback information are used to manufacture the best street / performance suspension kits for our customers.
CRUX's name might imply "racing suspension". However, each system is hand made to meet J's racing specification and the smoothness of the system also provides a comfortable ride on the street.
Standard kit
Aluminum body damper (front / rear) with the 30 stages adjustable dumping force
Spring (several choices are offered to match your driving stage)
Aluminum upper sheet front & rear
Bump rubber
Dust boots
- Front Pillow Upper Mount - for Special Dumper Kit
Parts# PUM-E2-F
Price $417.00
Designed for the special dumper kit, it is a front pillow upper mount kit
made of aluminum.
- CL7 Wide Tread Spacer
26mm Parts# WTS-E2-26 Price $214.00
20mm Parts# WTS-E2-20 Price $191.00
15mm Parts# WTS-E2-15 Price $191.00
10mm Parts# WTS-E2-10 Price $191.00
26mm, 20mm, 15mm spacers are made of duralumin and 10mm spacer is made of carbon steel. PCD 114.3, holes 5, and pitch 1.5.
Manufactured by precise forging, it is very strong and light.
- CL7 Long Hub Bolt 10mm (Long lug bolt)
Parts# LHB-E2-10
Price $17.00
Made of Chromium molybdenum steel (chrome-moly)
Size M12 x P1.5
Extension 10mm
Spline (threaded area) diameter 12.3mm
Total length 53mm
This longer hub bolts will provide more freedom in choosing a big caliper brake system, wider fender flare, and performance wheels.
[The price is for one piece. 20 pieces are required for one CL7.]
- CL7 Long Hub Bolt 20mm (Long lug bolt)
Parts# LHB-E2-20
Price $19.00
Made of Chromium molybdenum steel (chrome-moly)
Size M12 x P1.5
Extension 20mm
Spline (threaded area) diameter 12.3mm
Total length 63mm
The longer hub bolts will provide more freedom in choosing a big caliper brake system, wider fender flare, and performance wheels.
[The price is for one piece. 20 pieces are required for one CL7.]
- CL7 Super Taikyu Long Hub Bolt
Parts# LHBSS-E2-15
Price $32.00
Designed for Super Taikyu Racing, (Super Endurance Race Series). Tapering the tip of the bolt, makes it easier to change the tires and at the same time prevents costly mistakes while racing. Made of chrome-moly (SCM435) and with a special heat treatment application, the SCM435 will provide additional strength.
- CL7 FF Roll Center Adjuster
Parts# FCJ-E2
Price $261.00
The roll center adjuster corrects the roll center geometry and achieves the perfect setting you desire.
The lower arm angle on a low-built car tends to be far from ideal and the roll center point can move to a far lower position. The deviation of the roll center from the center of gravity results in a deteriorated cornering force due to the increased body roll. The roll center adjuster rectifies the situation and produces the ideal suspension geometry.
[Results]
Reduced roll, increased stability of the tires, sharper steering response, and faster corning!
|
